Metal shavings would be a real problem with a rotary tool. I just use a
small pair of wire cutters.
Chad
----- Original Message Follows -----
> I wouldn't advise using a Dremmel for chip removal due to the
> possibility of metal filings creeping under chips, etc so causing
> shorts elsewhere on the board and inevitably leading to more
> fault-finding.
>
>
> Phil
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Sep 8 15:18:06 2006
This archive was generated by hypermail 2.1.8 : Fri Sep 08 2006 - 16:50:02 EDT